Single chip, eight-channel 16-bit ADC

Your current ADC will be downed by a high voltage noise on its inputs! Not OctAD-16! It can withstand up to 150 V…

  • No need any longer for expensive instrumentation amplifiers between sensor and converter
  • Cost saving and reliability increase while converting analog signals from DISTANT sensors:
    • concentration of analog signals for conversion on single board
    • low sensitivity to noise, while keeping the sensor at a distance
    • low maintenance hassle of your data conversion module
  • Benefits today from electronics embedded in the airplane of tomorrow!


  • same interface for distant or local sensors
  • Single +3.3 V power supply ± 10 %
  • Temperature range from -40 °C to 85 °C
  • Main clock: 256 Fs
  • Cascadable chip
  • JTAG port
  • PQFP 100 package

Key characteristics

  • Large Common Mode Input Voltage Range: ± 10 V for using remote sensors (several tens of meters)
  • High Common Mode Rejection Ratio (CMRR): 60 dB for filtering parasitics on analog signal
  • Typical SNR 85 dB in the band (10 Hz, Fs/2)
  • Useful signal in the band (DC, Fs/8)
  • Output sampling Fs between 2 kHz and 16 kHz
  • Typical power consumption < 100 mA

Main applications

No equivalent solution available on the market for distant sensors
Market segments: Aeronautics, space and military Industrial and Measurement systems
Targeted applications:

  • sensor interface (distant or local sensors)
  • data acquisition and conversion
  • weighing
  • robotics
  • virtual reality

Application schematics

For your evaluation (delivered under NDA)

Product specification
Simulation models (pending)
Prototype samples within an evaluation board
(upon evaluation agreement)

DC conversion showing high stability (±1 LSB) for 200 successive conversions of the same analog input signal with the same high level amplitude

high SNR and THD observed on FFT with signal

Very low Noise observed on FFT without signal